Oxalic Acid 6% solution - Rust & Stain Remover

£5.99

Oxalic Acid 6% Rust & Stain Remover Liquid Technical grade Oxalic acid solutions are excellent cleaners and stain removers for hard surfaces, including, metals, wood, fibreglass, painted and non-slip surfaces. It removes stubborn, ingrained stains like rust, oxidation, dirt, algae, bird lime and rubber marks. Excellent stain remover. Versatile – can be used on most hard surfaces. Dissolves rust, oxidation, bird droppings,...

Oxalic Acid Dihydrate - Rust remover / Wood bleach / Hull, Deck Cleaner

£15.99

OXALIC ACID DIHYDRATE Ethanedioic acid Technical grade  For Oxalic Acid 6% Solution Click Here What is oxalic acid: Oxalic acid is an organic compound with the formula H2C2O4 also known as Ethanedioic acid. It is a colourless crystalline solid that dissolves in water to give colorless acidic solutions. It is classified as a dicarboxylic acid. Oxalic acid is a relatively...

Phosphoric Acid 20% V/V - Descaler / Rust remover

£16.99

PHOSPHORIC ACID 20% v/v Technical grade Properties of Phosphoric Acid: CAS No: 7664-38-2 EC No: 231-633-2 UN No. 1805 Formula: H3PO4 Appearance: Colourless liquid Molar mass: 98.00 g/mol Boiling point: 158 C Health classification: Irritant Phosphoric acid is classified as corrosive above 25% concentration. Between 10% and 25% it is classified as an irritant and below 10% it is not classified as harmful. GENERAL USES FOR PHOSPHORIC ACID (All strengths):...

Phosphoric Acid 75% - H3PO4

£69.99

PHOSPHORIC ACID 75% v/v Technical grade Phosphoric acid is clear, colourless, odourless, non-volatile, rather viscous, syrupy liquid, but still pourable. Properties of Phosphoric Acid: CAS No: 7664-38-2 EC No: 231-633-2 UN No. 1805 Formula: H3PO4 Appearance: Colourless liquid Molar mass: 98.00 g/mol Specific gravity: 1.65 Boiling point: 147 C Health classification: Corrosive   Phosphoric acid is classified as corrosive above 25% concentration. Between 10% and 25% it is classified as an...

Sodium Bisulphate - Dry Acid - pH Reducer

£5.99

SODIUM BISULPHATE (Bisulfate) Dry Acid - pH Reducer Technical grade Sodium bisulphate also known as dry acid occurs as an odourless, hygroscopic white powder that is soluble in water. Its solutions are strongly acidic and corrosive. It is manufactured by reacting sodium hydroxide with sulphuric acid. Sodium bisulphate acts as a technological additive, a preservative, a disinfectant, an acidity regulator,...

Stearic Acid - High Purity - Octadecenoic acid

£15.99

Stearic Acid Technical grade Synonyms: Octadecenoic acid, A high grade Stearic Acid. It can be used as an emulsifier and cleansing agent in personal care products. INCI - Stearic Acid   SPECIFICATION CAS No.: 67701-03-5 Molecular Weight: 284.48 g/mol Chemical Formula: C18H36O2 Appearance: waxy white solid Solubility: insoluble in water (3mg/L) S.G. 0.847 g/ml at 20c Melting Point: 55-66 °C...

Sulphamic Acid (Sulfamic) - Descaler / Rust Remover

£5.99

SULPHAMIC ACID Technical grade Descaler, Cleaner, Rust & Limescale Remover Sulphamic acid also called sulfamic acid is a white crystalline solid which is stable and non-hygroscopic. It is soluble in water and formamide and slightly soluble in methanol, ether, acetone and concentrated sulphuric acid. It is classified as a strong inorganic acid and is commercially produced from urea and fuming...

TOFA 2 - Tall Oil Fatty Acid (2% Rosin)

£6.59

Tall oil fatty acid (TOFA 2) Technical grade A tall oil fatty acid (TOFA) with high fatty acid content and low content of 2% rosin acids and unsaponifiables. The fatty acid fraction consists primarily of oleic and linoleic acids. The light colour together with excellent colour stability and air drying properties are derived from its origin, the northern pine. CAS number: 61790-12-3...